We found your home
6 PINE CLOSE, AUDENSHAW
Estimated boiler replacement
£1,900–£3,200
For a flat like yours · estimated installed cost
Your options for this home
Boiler replacement
Estimated installed cost · 2.5–3.5 kW
- Fuel confirmed on survey
- Suitable for your home size
- Combi or system options
See details →
- • Preliminary heat requirement 2.5–3.5 kW from 42.0 m² and construction era 1950s.
- • Heating system type to be confirmed on survey.
New central heating
Complete system estimate · 3–4 kW
- Boiler / heat source
- Radiators (~4)
- Pipework & controls
See details →
- • A complete new system priced on ~4 radiators, pipework and a boiler.
- • Radiator count is indicative from floor area and confirmed on survey.
Home air conditioning
Multi-split system estimate · 4–6 kW · ~3 units
- Approx. 3 indoor units
- Heating & cooling
- Professional installation
See details →
- • Total floor area is not the same as conditioned area; this reflects the selected room scenario.
Heating & cooling profile
HotAndCold's model combines the recorded floor area, property type and EPC data, so this 42m² 1950s flat has a current EPC rating of C69 and its recorded heating. HotAndCold estimates a space-heating requirement of approximately 2.5–3.5kW. The recorded EPC score is comparatively high for existing housing stock. The estimated heat demand per square metre is towards the lower end.
Hot&Cold snapshot
What stands out about this home
Why this estimate?
We calculate estimates using your property's size, type, age, heating fuel and EPC rating, along with typical installation costs, not a professional heat-loss survey.
How we calculated this
What we found about your home
- Property type
- Flat
- Floor area
- 42 m²
- Energy rating
- EPC C69
- Main heating fuel
- Electric
- Approx. age
- 1950s
- Location
- AUDENSHAW, Tameside
We use publicly available data and industry models to generate this estimate. A final survey by an installer may vary.
How this home compares locally
Based on 18 EPC-recorded properties nearby.
Building
- Built form
- Flat
- Internal area (EPC)
- 42 m²
- Building footprint
- ~329 m²
- Approx. dimensions
- ~35.3 × 9.3 m
- Main building axis
- N–S
- Nearest building
- 10.0 m
Footprint & dimensions derived from Overture Maps building data (ODbL). Approximate, not survey-grade.
How this home is constructed & heated
Recorded on its Energy Performance Certificate.
- Walls
- System built, with external insulation
- Roof
- Flat, limited insulation
- Windows
- Fully double glazed
- Main heating
- Boiler and radiators, electric
- Heating controls
- Programmer, room thermostat and TRVs
- Hot water
- From main system, no cylinder thermostat
- Floor
- (another dwelling below)
Energy improvement potential
Recommended improvements for this property
Measures from this home’s official Energy Performance Certificate assessment that could raise its rating and cut running costs, specific to 6 PINE CLOSE, AUDENSHAW, MANCHESTER, M34 5AX.
- 1Flat roof or sloping ceiling insulationIndicative cost: £1,500
Insulation of a flat roof or sloping ceiling will significantly reduce heat loss through the roof; this will improve levels of comfort, reduce energy use and lower fuel bills. Where the weatherproof membrane is sound and the roof construction is appropriate, suitable insulation can be placed on top of the roof membrane (inverted roof). Alternatively, where the weatherproof membrane needs to be replaced insulation can be provided under the weatherproof membrane (warm roof). Further information about roof insulation and details of local contractors can be obtained from the National Insulation Association (www.nationalinsulationassociation.org.uk).
- 2Hot water cylinder thermostatIndicative cost: £400
A hot water cylinder thermostat enables the boiler to switch off when the water in the cylinder reaches the required temperature; this minimises the amount of energy that is used and lowers fuel bills. The thermostat is a temperature sensor that sends a signal to the boiler when the required temperature is reached. To be fully effective it needs to be sited in the correct position and hard wired in place, so it should be installed by a competent plumber or heating engineer.
- 3High performance external doorsIndicative cost: £1,000
High performance external doors contain insulation and lose heat at about half the rate of conventional external doors.
Source: the property’s domestic EPC recommendations (open data). Indicative only, get a professional survey before committing to any measure.
Common questions
How much does a replacement boiler cost for a property like this?+
For this property we estimate an installed cost of £1,900–£3,200. This is indicative and based on the property's size, type and energy characteristics, your final price depends on equipment choice and an installer survey.
What size boiler might this property need?+
Our preliminary model estimates a heat requirement of around 2.5–3.5 kW. An installer confirms exact sizing on a heat-loss assessment.
How much would air conditioning cost here?+
A multi-split installation is estimated at £3,800–£5,700, depending on how many rooms you want to cool (around 3 indoor units in a typical layout).
Are these guaranteed prices?+
No, they are indicative estimates to help you understand likely costs before speaking to an installer. Your final price depends on equipment choice, installation complexity and a survey.
Other homes nearby
Ready to get exact prices?
Compare no-obligation quotes from vetted local installers for your property.