We found your home
FLAT 3, 50 DELAUNAYS ROAD
Estimated boiler replacement
£1,900–£3,200
For a flat like yours · estimated installed cost
Your options for this home
Boiler replacement
Estimated installed cost · 2.5–3.5 kW
- Fuel confirmed on survey
- Suitable for your home size
- Combi or system options
See details →
- • Preliminary heat requirement 2.5–3.5 kW from 35.0 m² and construction era pre_1900.
- • Heating system type to be confirmed on survey.
New central heating
Complete system estimate · 3–3.5 kW
- Boiler / heat source
- Radiators (~4)
- Pipework & controls
See details →
- • A complete new system priced on ~4 radiators, pipework and a boiler.
- • Radiator count is indicative from floor area and confirmed on survey.
Home air conditioning
Multi-split system estimate · 4–6 kW · ~3 units
- Approx. 3 indoor units
- Heating & cooling
- Professional installation
See details →
- • Total floor area is not the same as conditioned area; this reflects the selected room scenario.
Heating & cooling profile
Using the recorded floor area and EPC characteristics, this 35m² pre-1900 flat has a current EPC rating of E51 and its recorded heating. HotAndCold estimates a space-heating requirement of approximately 2.5–3.5kW. Its current energy rating indicates relatively weak energy performance compared with more efficient homes. The estimated heat demand per square metre is around typical levels.
Hot&Cold snapshot
What stands out about this home
Why this estimate?
We calculate estimates using your property's size, type, age, heating fuel and EPC rating, along with typical installation costs — not a professional heat-loss survey.
How we calculated this
What we found about your home
- Property type
- Flat
- Floor area
- 35 m²
- Energy rating
- EPC E51
- Main heating fuel
- Electric
- Approx. age
- Pre-1900
- Location
- MANCHESTER, Manchester
We use publicly available data and industry models to generate this estimate. A final survey by an installer may vary.
How this home compares locally
Based on 61 EPC-recorded properties nearby.
Building
- Built form
- Flat
- Internal area (EPC)
- 35 m²
- Building footprint
- ~211 m²
- Approx. dimensions
- ~18.7 × 13.2 m
- Main building axis
- NW–SE
- Estimated floors
- 2
- Nearest building
- 1.6 m
Footprint & dimensions derived from Overture Maps building data (ODbL). Approximate, not survey-grade.
How this home is constructed & heated
Recorded on its Energy Performance Certificate.
- Walls
- Solid brick, with internal insulation
- Roof
- Pitched, no insulation (assumed)
- Windows
- Fully double glazed
- Main heating
- Boiler and radiators, electric
- Heating controls
- Programmer and room thermostat
- Hot water
- Electric instantaneous at point of use
- Floor
- Solid, no insulation (assumed)
Energy improvement potential
Recommended improvements for this property
Measures from this home’s official Energy Performance Certificate assessment that could raise its rating and cut running costs, specific to FLAT 3, 50 DELAUNAYS ROAD, MANCHESTER, M8 4RF.
- 1Upgrade heating controlsIndicative cost: £350 - £450
Thermostatic radiator valves allow the temperature of each room to be controlled to suit individual needs, adding to comfort and reducing heating bills provided internal doors are kept closed. For example, they can be set to be warmer in the living room and bathroom than in the bedrooms. Ask a competent heating engineer to install thermostatic radiator valves. Thermostatic radiator valves should be fitted to every radiator except the radiator in the same room as the room thermostat. Remember the room thermostat is needed as well as the thermostatic radiator valves, to enable the boiler to switch off when no heat is required. It is best to obtain advice from a qualified heating engineer.
- 2Floor insulation (solid floor)Indicative cost: £4,000 - £6,000
Insulation of a floor will significantly reduce heat loss; this will improve levels of comfort, reduce energy use and lower fuel bills. Further information about floor insulation is available from many sources including www.energysavingtrust.org.uk/northernireland/Insulation/Floor-insulation.
- 3High performance external doorsIndicative cost: £500
High performance external doors contain insulation and lose heat at about half the rate of conventional external doors.
Source: the property’s domestic EPC recommendations (open data). Indicative only — get a professional survey before committing to any measure.
Energy rating history
Recorded change: +13 EPC points across 2 certificates.
- 2016F38
- 2020E51
Common questions
How much does a replacement boiler cost for a property like this?+
For this property we estimate an installed cost of £1,900–£3,200. This is indicative and based on the property's size, type and energy characteristics — your final price depends on equipment choice and an installer survey.
What size boiler might this property need?+
Our preliminary model estimates a heat requirement of around 2.5–3.5 kW. An installer confirms exact sizing on a heat-loss assessment.
How much would air conditioning cost here?+
A multi-split installation is estimated at £3,800–£5,700, depending on how many rooms you want to cool (around 3 indoor units in a typical layout).
Are these guaranteed prices?+
No — they are indicative estimates to help you understand likely costs before speaking to an installer. Your final price depends on equipment choice, installation complexity and a survey.
Other homes nearby
Ready to get exact prices?
Compare no-obligation quotes from vetted local installers for your property.