We found your home
FLAT 11, THE OLD RIBBON MILL
Estimated boiler replacement
£1,900–£3,200
For a flat like yours · estimated installed cost
Your options for this home
Boiler replacement
Estimated installed cost · 6–7.5 kW
- Fuel confirmed on survey
- Suitable for your home size
- Combi or system options
See details →
- • Preliminary heat requirement 6.0–7.5 kW from 60.0 m² and construction era pre_1900.
- • Heating system type to be confirmed on survey.
New central heating
Complete system estimate · 5.5–7 kW
- Boiler / heat source
- Radiators (~5)
- Pipework & controls
See details →
- • A complete new system priced on ~5 radiators, pipework and a boiler.
- • Radiator count is indicative from floor area and confirmed on survey.
Home air conditioning
Multi-split system estimate · 4–6 kW · ~3 units
- Approx. 3 indoor units
- Heating & cooling
- Professional installation
See details →
- • Total floor area is not the same as conditioned area; this reflects the selected room scenario.
Heating & cooling profile
HotAndCold's model combines the recorded floor area, property type and EPC data, so this 60m² pre-1900 flat has a current EPC rating of E53 and its recorded heating. HotAndCold estimates a space-heating requirement of approximately 6.0–7.5kW. Its current energy rating indicates relatively weak energy performance compared with more efficient homes. The estimated heat demand per square metre is towards the higher end.
Hot&Cold snapshot
What stands out about this home
Why this estimate?
We calculate estimates using your property's size, type, age, heating fuel and EPC rating, along with typical installation costs — not a professional heat-loss survey.
How we calculated this
What we found about your home
- Property type
- Flat
- Floor area
- 60 m²
- Energy rating
- EPC E53
- Main heating fuel
- Electric
- Approx. age
- Pre-1900
- Location
- MACCLESFIELD, Cheshire East
We use publicly available data and industry models to generate this estimate. A final survey by an installer may vary.
How this home compares locally
Based on 20 EPC-recorded properties nearby.
Building
- Built form
- Flat
- Internal area (EPC)
- 60 m²
- Building footprint
- ~250 m²
- Approx. dimensions
- ~24.8 × 10.0 m
- Main building axis
- N–S
- Nearest building
- 1.7 m
Footprint & dimensions derived from Overture Maps building data (ODbL). Approximate, not survey-grade.
How this home is constructed & heated
Recorded on its Energy Performance Certificate.
- Walls
- Solid brick, as built, no insulation (assumed)
- Roof
- Pitched, no insulation (assumed)
- Windows
- Fully double glazed
- Main heating
- Electric storage heaters
- Heating controls
- Controls for high heat retention storage heaters
- Hot water
- Electric immersion, off-peak
- Floor
- (another dwelling below)
Energy improvement potential
Recommended improvements for this property
Measures from this home’s official Energy Performance Certificate assessment that could raise its rating and cut running costs, specific to FLAT 11, THE OLD RIBBON MILL, PITT STREET, MACCLESFIELD, SK11 7PY.
- 150 mm internal or external wall insulationIndicative cost: £4,000 - £14,000
Solid wall insulation involves adding a layer of insulation to either the inside or the outside surface of the external walls, which reduces heat loss and lowers fuel bills. As it is more expensive than cavity wall insulation it is only recommended for walls without a cavity, or where for technical reasons a cavity cannot be filled. Internal insulation, known as dry-lining, is where a layer of insulation is fixed to the inside surface of external walls; this type of insulation is best applied when rooms require redecorating and can be installed by a competent DIY enthusiast. External solid wall insulation is the application of an insulant and a weather-protective finish to the outside of the wall. This may improve the look of the home, particularly where existing brickwork or rendering is poor, and will provide long-lasting weather protection. Further information can be obtained from the National Insulation Association (www.nationalinsulationassociation.org.uk).
Source: the property’s domestic EPC recommendations (open data). Indicative only — get a professional survey before committing to any measure.
Common questions
How much does a replacement boiler cost for a property like this?+
For this property we estimate an installed cost of £1,900–£3,200. This is indicative and based on the property's size, type and energy characteristics — your final price depends on equipment choice and an installer survey.
What size boiler might this property need?+
Our preliminary model estimates a heat requirement of around 6–7.5 kW. An installer confirms exact sizing on a heat-loss assessment.
How much would air conditioning cost here?+
A multi-split installation is estimated at £3,800–£5,700, depending on how many rooms you want to cool (around 3 indoor units in a typical layout).
Are these guaranteed prices?+
No — they are indicative estimates to help you understand likely costs before speaking to an installer. Your final price depends on equipment choice, installation complexity and a survey.
Other homes nearby
Ready to get exact prices?
Compare no-obligation quotes from vetted local installers for your property.