Hot&Cold.energy

We found your home

8, ARUNDEL HOUSE

Flat26 m²EPC C72Mains gas1900–1929

Estimated boiler replacement

£1,900–£3,200

For a flat like yours · estimated installed cost

FreeNo obligationLocal installers

Your options for this home

Boiler replacement

£1,900–£3,200

Estimated installed cost · 2–2.5 kW

  • Existing mains gas
  • Suitable for your home size
  • Combi or system options
See details
  • Preliminary heat requirement 2.0–2.5 kW from 26.0 m² and construction era 1900_1929.
  • Existing wet central heating assumed where mains gas is present.

New central heating

£3,220–£5,080

Complete system estimate · 2–2.5 kW

  • Boiler / heat source
  • Radiators (~4)
  • Pipework & controls
See details
  • A complete new system priced on ~4 radiators, pipework and a boiler.
  • Radiator count is indicative from floor area and confirmed on survey.

Home air conditioning

£3,800–£5,700

Multi-split system estimate · 4–6 kW · ~3 units

  • Approx. 3 indoor units
  • Heating & cooling
  • Professional installation
See details
  • Total floor area is not the same as conditioned area; this reflects the selected room scenario.

Heating & cooling profile

Based on this property's recorded characteristics, this 26m² flat has a current EPC rating of C72 and mains-gas heating. HotAndCold estimates a space-heating requirement of approximately 2.0–2.5kW. This property has relatively strong recorded energy efficiency. Its modelled space-heating intensity per square metre is moderate.

Estimated space-heating intensity
7796 W/m²
moderateProperty data confidence: Good

Hot&Cold snapshot

Property size
Smaller
Energy efficiency
Higher
Heating intensity
Moderate
Improvement potential
Limited
Main heating fuel
Mains gas
Cooling requirement
Medium

What stands out about this home

Solid-wall construction
Older construction
Modern heating controls recorded

Why this estimate?

We calculate estimates using your property's size, type, age, heating fuel and EPC rating, along with typical installation costs — not a professional heat-loss survey.

How we calculated this

26 m²
Floor area
+
flat
Property type
+
EPC C72
Energy rating
+
Mains gas
Current fuel
Hot&Cold property model
2–2.5 kW
Estimated heating requirement for this property

What we found about your home

Property type
Flat
Floor area
26 m²
Energy rating
EPC C72
Main heating fuel
Mains gas
Approx. age
1900–1929
Location
WARRINGTON, Warrington

We use publicly available data and industry models to generate this estimate. A final survey by an installer may vary.

How this home compares locally

Based on 16 EPC-recorded properties nearby.

Floor area
-10%
10% smaller than the local median
EPC rating
-2
2 EPC points below the local median
Mains gas
75%
75% of nearby EPC-recorded homes use mains gas
Property type
100%
this property type is 100% of nearby recorded homes

Sale history

Recorded sales for 8 from HM Land Registry Price Paid data.

  1. £90,000
    Jan 2003 · Terraced

Contains HM Land Registry data © Crown copyright and database right. Sale prices are historic and not a current valuation.

Building

Built form
Flat
Internal area (EPC)
26 m²
Building footprint
~1112 m²
Approx. dimensions
~58.5 × 28.6 m
Main building axis
E–W
Nearest building
0.0 m

Footprint & dimensions derived from Overture Maps building data (ODbL). Approximate, not survey-grade.

How this home is constructed & heated

Recorded on its Energy Performance Certificate.

Walls
Solid brick, with internal insulation
Roof
Pitched, 400 mm loft insulation
Windows
Fully double glazed
Main heating
Boiler and radiators, mains gas
Heating controls
Programmer, room thermostat and TRVs
Hot water
From main system, no cylinder thermostat
Floor
(another dwelling below)

Energy improvement potential

Current
C72
Potential
C75
+3
Limited improvement potential

Recommended improvements for this property

Measures from this home’s official Energy Performance Certificate assessment that could raise its rating and cut running costs, specific to 8, ARUNDEL HOUSE, RYLANDS STREET, BEWSEY AND WHITECROSS, WARRINGTON, WA1 1EN.

  1. 1
    Hot water cylinder thermostatIndicative cost: £200 - £400

    A hot water cylinder thermostat enables the boiler to switch off when the water in the cylinder reaches the required temperature; this minimises the amount of energy that is used and lowers fuel bills. The thermostat is a temperature sensor that sends a signal to the boiler when the required temperature is reached. To be fully effective it needs to be sited in the correct position and hard wired in place, so it should be installed by a competent plumber or heating engineer.

Source: the property’s domestic EPC recommendations (open data). Indicative only — get a professional survey before committing to any measure.

A
B
C
D
E
F
G
Current: C72Potential: C75

Common questions

How much does a replacement boiler cost for a property like this?+

For this property we estimate an installed cost of £1,900–£3,200. This is indicative and based on the property's size, type and energy characteristics — your final price depends on equipment choice and an installer survey.

What size boiler might this property need?+

Our preliminary model estimates a heat requirement of around 2–2.5 kW. An installer confirms exact sizing on a heat-loss assessment.

How much would air conditioning cost here?+

A multi-split installation is estimated at £3,800–£5,700, depending on how many rooms you want to cool (around 3 indoor units in a typical layout).

Are these guaranteed prices?+

No — they are indicative estimates to help you understand likely costs before speaking to an installer. Your final price depends on equipment choice, installation complexity and a survey.

Other homes nearby

Ready to get exact prices?

Compare no-obligation quotes from vetted local installers for your property.