We found your home
7 TIMOTHY CLOSE, SALFORD
Estimated boiler replacement
£1,900–£3,200
For a semi-detached like yours · estimated installed cost
Your options for this home
Boiler replacement
Estimated installed cost · 8–10.5 kW
- Existing mains gas
- Suitable for your home size
- Combi or system options
See details →
- • Preliminary heat requirement 8.0–10.5 kW from 112.0 m² and construction era 1960s.
- • Existing wet central heating assumed where mains gas is present.
New central heating
Complete system estimate · 7.5–10 kW
- Boiler / heat source
- Radiators (~10)
- Pipework & controls
See details →
- • A complete new system priced on ~10 radiators, pipework and a boiler.
- • Radiator count is indicative from floor area and confirmed on survey.
Home air conditioning
Multi-split system estimate · 4–6 kW · ~3 units
- Approx. 3 indoor units
- Heating & cooling
- Professional installation
See details →
- • Total floor area is not the same as conditioned area; this reflects the selected room scenario.
Heating & cooling profile
Based on this property's recorded characteristics, this 112m² 1960s semi-detached home has a current EPC rating of E52 and mains-gas heating. HotAndCold estimates a space-heating requirement of approximately 8.0–10.5kW. The recorded EPC score sits towards the lower end of the efficiency range. Its modelled space-heating intensity per square metre is moderate.
Hot&Cold snapshot
What stands out about this home
Why this estimate?
We calculate estimates using your property's size, type, age, heating fuel and EPC rating, along with typical installation costs, not a professional heat-loss survey.
How we calculated this
What we found about your home
- Property type
- Semi-detached
- Floor area
- 112 m²
- Energy rating
- EPC E52
- Main heating fuel
- Mains gas
- Approx. age
- 1960s
- Location
- SALFORD, Salford
We use publicly available data and industry models to generate this estimate. A final survey by an installer may vary.
How this home compares locally
Based on 103569 EPC-recorded properties nearby.
Sale history
Recorded sales for 7 TIMOTHY CLOSE from HM Land Registry Price Paid data.
- £156,000May 2014 · Semi-detached
- £51,500Mar 2000 · Semi-detached
Contains HM Land Registry data © Crown copyright and database right. Sale prices are historic and not a current valuation.
Building
- Built form
- Semi-detached
- Internal area (EPC)
- 112 m²
- Building footprint
- ~151 m²
- Approx. dimensions
- ~15.8 × 11.7 m
- Main building axis
- N–S
- Estimated floors
- 2
- Nearest building
- 3.7 m
Footprint & dimensions derived from Overture Maps building data (ODbL). Approximate, not survey-grade.
How this home is constructed & heated
Recorded on its Energy Performance Certificate.
- Walls
- Cavity wall, as built, no insulation (assumed)
- Roof
- Pitched, 50 mm loft insulation
- Windows
- Fully double glazed
- Main heating
- Boiler and radiators, mains gas
- Heating controls
- Programmer, no room thermostat
- Hot water
- From main system
- Floor
- Solid, no insulation (assumed)
Energy improvement potential
Recommended improvements for this property
Measures from this home’s official Energy Performance Certificate assessment that could raise its rating and cut running costs, specific to 7 TIMOTHY CLOSE, SALFORD, M6 8FF.
- 1Cavity wall insulationIndicative cost: £500 - £1,500
Cavity wall insulation, to fill the gap between the inner and outer layers of external walls with an insulating material, reduces heat loss; this will improve levels of comfort, reduce energy use and lower fuel bills. The insulation material is pumped into the gap through small holes that are drilled into the outer walls, and the holes are made good afterwards. As specialist machinery is used to fill the cavity, a professional installation company should carry out this work, and they should carry out a thorough survey before commencing work to ensure that this type of insulation is suitable for this home. They should also provide a guarantee for the work and handle any building control issues. Further information about cavity wall insulation and details of local installers can be obtained from the National Insulation Association (www.nationalinsulationassociation.org.uk).
- 2Floor insulationIndicative cost: £800 - £1,200
Insulation of a floor will significantly reduce heat loss; this will improve levels of comfort, reduce energy use and lower fuel bills. Suspended floors can sometimes be insulated from below which means that the floor does not need to be lifted to install the insulation. Further information about floor insulation and details of local contractors can be obtained from the National Insulation Association (www.nationalinsulationassociation.org.uk).
- 3Increase loft insulation to 270 mmIndicative cost: £100 - £350
Loft insulation laid in the loft space or between roof rafters to a depth of at least 270 mm will significantly reduce heat loss through the roof; this will improve levels of comfort, reduce energy use and lower fuel bills. Insulation should not be placed below any cold water storage tank; any such tank should also be insulated on its sides and top, and there should be boarding on battens over the insulation to provide safe access between the loft hatch and the cold water tank. The insulation can be installed by professional contractors but also by a capable DIY enthusiast. Loose granules may be used instead of insulation quilt; this form of loft insulation can be blown into place and can be useful where access is difficult. The loft space must have adequate ventilation to prevent dampness; seek advice about this if unsure (particularly if installing insulation between rafters because a vapour control layer and ventilation above the insulation are required). Further information about loft insulation and details of local contractors can be obtained from the National Insulation Association (www.nationalinsulationassociation.org.uk).
- 4Upgrade heating controlsIndicative cost: £350 - £450
A room thermostat will increase the efficiency of the heating system by enabling the boiler to switch off when no heat is required; this will reduce the amount of energy used and lower fuel bills. Thermostatic radiator valves should also be installed, to allow the temperature of each room to be controlled to suit individual needs, adding to comfort and reducing heating bills provided internal doors are kept closed. For example, they can be set to be warmer in the living room and bathroom than in the bedrooms. Ask a competent heating engineer to install thermostatic radiator valves and a fully pumped system with the pump and the boiler turned off by the room thermostat. Thermostatic radiator valves should be fitted to every radiator except for the radiator in the same room as the room thermostat. Remember the room thermostat is needed as well as the thermostatic radiator valves, to enable the boiler to switch off when no heat is required. It is best to obtain advice from a qualified heating engineer.
- 5Solar photovoltaic panels, 2.5 kWpIndicative cost: £9,000 - £14,000
A solar PV system is one which converts light directly into electricity via panels placed on the roof with no waste and no emissions. This electricity is used throughout the home in the same way as the electricity purchased from an energy supplier. The British Photovoltaic Association has up-to-date information on local installers who are qualified electricians. It is best to obtain advice from a qualified electrician. Ask the electrician to explain the options.
Source: the property’s domestic EPC recommendations (open data). Indicative only, get a professional survey before committing to any measure.
Energy rating history
Recorded change: -10 EPC points across 2 certificates.
- 2014D62
- 2014E52
Common questions
How much does a replacement boiler cost for a property like this?+
For this property we estimate an installed cost of £1,900–£3,200. This is indicative and based on the property's size, type and energy characteristics, your final price depends on equipment choice and an installer survey.
What size boiler might this property need?+
Our preliminary model estimates a heat requirement of around 8–10.5 kW. An installer confirms exact sizing on a heat-loss assessment.
How much would air conditioning cost here?+
A multi-split installation is estimated at £3,800–£5,700, depending on how many rooms you want to cool (around 3 indoor units in a typical layout).
Are these guaranteed prices?+
No, they are indicative estimates to help you understand likely costs before speaking to an installer. Your final price depends on equipment choice, installation complexity and a survey.
Other homes nearby
Ready to get exact prices?
Compare no-obligation quotes from vetted local installers for your property.