We found your home
56 BEVILL SQUARE, SALFORD
Estimated boiler replacement
£1,900–£3,200
For a flat like yours · estimated installed cost
Your options for this home
Boiler replacement
Estimated installed cost · 4–5.5 kW
- Existing mains gas
- Suitable for your home size
- Combi or system options
See details →
- • Preliminary heat requirement 4.0–5.5 kW from 60.0 m² and construction era 1960s.
- • Existing wet central heating assumed where mains gas is present.
New central heating
Complete system estimate · 4–5.5 kW
- Boiler / heat source
- Radiators (~5)
- Pipework & controls
See details →
- • A complete new system priced on ~5 radiators, pipework and a boiler.
- • Radiator count is indicative from floor area and confirmed on survey.
Home air conditioning
Multi-split system estimate · 4–6 kW · ~3 units
- Approx. 3 indoor units
- Heating & cooling
- Professional installation
See details →
- • Total floor area is not the same as conditioned area; this reflects the selected room scenario.
Heating & cooling profile
Based on this property's recorded characteristics, this 60m² 1960s flat has a current EPC rating of D64 and mains-gas heating. HotAndCold estimates a space-heating requirement of approximately 4.0–5.5kW. The recorded EPC score places this home in the middle of the efficiency range. Its modelled space-heating intensity per square metre is moderate.
Hot&Cold snapshot
What stands out about this home
Why this estimate?
We calculate estimates using your property's size, type, age, heating fuel and EPC rating, along with typical installation costs — not a professional heat-loss survey.
How we calculated this
What we found about your home
- Property type
- Flat
- Floor area
- 60 m²
- Energy rating
- EPC D64
- Main heating fuel
- Mains gas
- Approx. age
- 1960s
- Location
- SALFORD, Salford
We use publicly available data and industry models to generate this estimate. A final survey by an installer may vary.
How this home compares locally
Based on 49 EPC-recorded properties nearby.
Building
- Built form
- Flat
- Internal area (EPC)
- 60 m²
- Building footprint
- ~154 m²
- Approx. dimensions
- ~17.7 × 10.1 m
- Main building axis
- N–S
- Nearest building
- 0.0 m
Footprint & dimensions derived from Overture Maps building data (ODbL). Approximate, not survey-grade.
How this home is constructed & heated
Recorded on its Energy Performance Certificate.
- Walls
- Cavity wall, filled cavity
- Roof
- (another dwelling above)
- Windows
- Fully double glazed
- Main heating
- Boiler and radiators, mains gas
- Heating controls
- Programmer, room thermostat and TRVs
- Hot water
- Electric immersion, standard tariff
- Floor
- (another dwelling below)
Energy improvement potential
Recommended improvements for this property
Measures from this home’s official Energy Performance Certificate assessment that could raise its rating and cut running costs, specific to 56 BEVILL SQUARE, SALFORD, M3 6BB.
- 1Add additional 80 mm jacket to hot water cylinderIndicative cost: £15 - £30
Increasing the thickness of existing insulation by adding an 80 mm cylinder jacket around the hot water cylinder will help maintain the water at the required temperature; this will reduce the amount of energy used and lower fuel bills. The jacket should be fitted over the top of the existing foam insulation and over any thermostat clamped to the cylinder. Hot water pipes from the hot water cylinder should also be insulated, using pre-formed pipe insulation of up to 50 mm thickness (or to suit the space available) for as far as they can be accessed to reduce losses in summer. All these materials can be purchased from DIY stores and installed by a competent DIY enthusiast.
- 2Replace boiler with new condensing boilerIndicative cost: £2,200 - £3,000
A condensing boiler is capable of much higher efficiencies than other types of boiler, meaning it will burn less fuel to heat this property. This improvement is most appropriate when the existing central heating boiler needs repair or replacement, but there may be exceptional circumstances making this impractical. Condensing boilers need a drain for the condensate which limits their location; remember this when considering remodelling the room containing the existing boiler even if the latter is to be retained for the time being (for example a kitchen makeover). It is best to obtain advice from a qualified heating engineer. Ask the engineer to explain the options.
Source: the property’s domestic EPC recommendations (open data). Indicative only — get a professional survey before committing to any measure.
Energy rating history
Recorded change: +10 EPC points across 3 certificates.
- 2014E54
- 2014D61
- 2024D64
Common questions
How much does a replacement boiler cost for a property like this?+
For this property we estimate an installed cost of £1,900–£3,200. This is indicative and based on the property's size, type and energy characteristics — your final price depends on equipment choice and an installer survey.
What size boiler might this property need?+
Our preliminary model estimates a heat requirement of around 4–5.5 kW. An installer confirms exact sizing on a heat-loss assessment.
How much would air conditioning cost here?+
A multi-split installation is estimated at £3,800–£5,700, depending on how many rooms you want to cool (around 3 indoor units in a typical layout).
Are these guaranteed prices?+
No — they are indicative estimates to help you understand likely costs before speaking to an installer. Your final price depends on equipment choice, installation complexity and a survey.
Other homes nearby
Ready to get exact prices?
Compare no-obligation quotes from vetted local installers for your property.