We found your home
45, THE ROYAL
Estimated boiler replacement
£1,900–£3,200
For a flat like yours · estimated installed cost
Your options for this home
Boiler replacement
Estimated installed cost · 3.5–5 kW
- Fuel confirmed on survey
- Suitable for your home size
- Combi or system options
See details →
- • Preliminary heat requirement 3.5–5.0 kW from 87.0 m² and construction era 1990s.
- • Heating system type to be confirmed on survey.
New central heating
Complete system estimate · 4–5.5 kW
- Boiler / heat source
- Radiators (~8)
- Pipework & controls
See details →
- • A complete new system priced on ~8 radiators, pipework and a boiler.
- • Radiator count is indicative from floor area and confirmed on survey.
Home air conditioning
Multi-split system estimate · 4–6 kW · ~3 units
- Approx. 3 indoor units
- Heating & cooling
- Professional installation
See details →
- • Total floor area is not the same as conditioned area; this reflects the selected room scenario.
Heating & cooling profile
HotAndCold's model combines the recorded floor area, property type and EPC data, so this 87m² 1990s flat has a current EPC rating of D64 and its recorded heating. HotAndCold estimates a space-heating requirement of approximately 3.5–5.0kW. This property has moderate recorded energy efficiency — neither especially poor nor especially high. Its modelled space-heating intensity per square metre is relatively low.
Hot&Cold snapshot
What stands out about this home
Why this estimate?
We calculate estimates using your property's size, type, age, heating fuel and EPC rating, along with typical installation costs — not a professional heat-loss survey.
How we calculated this
What we found about your home
- Property type
- Flat
- Floor area
- 87 m²
- Energy rating
- EPC D64
- Main heating fuel
- Electric
- Approx. age
- 1990s
- Location
- SALFORD, Salford
We use publicly available data and industry models to generate this estimate. A final survey by an installer may vary.
How this home compares locally
Based on 53 EPC-recorded properties nearby.
Building
- Built form
- Flat
- Internal area (EPC)
- 87 m²
- Building footprint
- ~3039 m²
- Approx. dimensions
- ~74.8 × 62.1 m
- Main building axis
- E–W
- Estimated floors
- 4
- Nearest building
- 0.0 m
Footprint & dimensions derived from Overture Maps building data (ODbL). Approximate, not survey-grade.
How this home is constructed & heated
Recorded on its Energy Performance Certificate.
- Walls
- Solid brick, as built, insulated (assumed)
- Roof
- Pitched, insulated (assumed)
- Windows
- Fully double glazed
- Main heating
- Electric storage heaters
- Heating controls
- Manual charge control
- Hot water
- Electric immersion, off-peak
- Floor
- (another dwelling below)
Energy improvement potential
Recommended improvements for this property
Measures from this home’s official Energy Performance Certificate assessment that could raise its rating and cut running costs, specific to 45, THE ROYAL, WILTON PLACE, SALFORD, M3 6WP.
- 1Low energy lighting for all fixed outletsIndicative cost: £80
Replacement of traditional light bulbs with energy saving recommended ones will reduce lighting costs over the lifetime of the bulb, and they last up to 12 times longer than ordinary light bulbs. Also consider selecting low energy light fittings when redecorating; contact the Lighting Association for your nearest stockist of Domestic Energy Efficient Lighting Scheme fittings.
- 2Heat recovery system for mixer showersIndicative cost: £585 - £725
A shower heat recovery system extracts heat from the water in the shower drain and transfers it to incoming cold water. This reduces the amount of energy needed per shower.
- 3High heat retention storage heatersIndicative cost: £1,600 - £2,400
Modern storage heaters have better insulation and are easier to control than the older type in the property. Ask for a quotation for new, high heat retention heaters with automatic charge and output controls. As installations should be in accordance with the current regulations covering electrical wiring, only a qualified electrician should carry out the installation. It is best to obtain advice from a qualified heating engineer. Ask the engineer to explain the options which might also include switching to other forms of electric heating.
Source: the property’s domestic EPC recommendations (open data). Indicative only — get a professional survey before committing to any measure.
Common questions
How much does a replacement boiler cost for a property like this?+
For this property we estimate an installed cost of £1,900–£3,200. This is indicative and based on the property's size, type and energy characteristics — your final price depends on equipment choice and an installer survey.
What size boiler might this property need?+
Our preliminary model estimates a heat requirement of around 3.5–5 kW. An installer confirms exact sizing on a heat-loss assessment.
How much would air conditioning cost here?+
A multi-split installation is estimated at £3,800–£5,700, depending on how many rooms you want to cool (around 3 indoor units in a typical layout).
Are these guaranteed prices?+
No — they are indicative estimates to help you understand likely costs before speaking to an installer. Your final price depends on equipment choice, installation complexity and a survey.
Other homes nearby
Ready to get exact prices?
Compare no-obligation quotes from vetted local installers for your property.